Package includes:
2 boxes of clarinet reeds (total 20pcs) 

When should change the reeds? 
When the treble is not good, the reeds are attached to the mouthpiece, which means the reeds are already very soft, and it must be changed. Also, when you feel that the tone has dropped a lot. 

How to install a clarinet reed?
1. Place the thin end of the reed in your mouth to soak or put it into a container of water to soak; 
2. Lay the flat side of the reed on the flat side of the mouthpiece; 
3. Carefully place the ligature over the reed; 
4. Make sure the tip of mouthpiece is almost perfectly even with the tip of reed; 
5. Adjust the reed by the sides with your thumb - don't touch the tip; 
6. Tighten the screws firmly to make sure the ligature can't slide off, but not too tight. 

Warm Tips:
1. The new reed is relatively dry and hard, and the vibration is not sufficient. It should be soaked in cold water for about 2 minutes before use (the front end of the bubble reed). You can prepare a few reeds for change, which can effectively extend the life of clarinet reeds. 
2.Take care when you install or place it, if the tip is broken or curved, the reed can't be used again. 
3. After each use, it's suggested to be gently washed with the water and absorbed the rest water with paper, put it in the ventilation and store it the case. 

Note:
1.Spots on the reeds don't affect the use at all. During the growth of the reeds, some parts are not covered by the leaves. When the dew gathered on these parts, and after exposure to the sun, the spots are formed. Some professionals specially choose this kind of reeds, since that means the reeds are grown in sufficient sunlight.
2.Our customer service will be on line for 24 hours, if you have any queries, don't hesitate to contact us.