【Technical Parameters】- Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3phase 220V 0-400Hz. Communication Control: RS-485. Vibration: below 0.5G. Operation Temperature: -10 ～40℃. Five-Digits Display and Status Indicator Lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect.
【General Control】- In addition to 4 segment reduction time (0.1-6500 seconds) can be arbitrarily selected, not only can set a V / F curve, but also set torque, up to 10.0% start torque can reach 150%. There are also other functions, like an automatic voltage regulator (AVR), deceleration stop or free stop, DC brake, automatic reset reset, frequency tracking, PLC program control, transverse control, carrier adjustable by max 20kHz, ect.
【Input/Output Terminals】- 6 Multi-function input terminals can implement 8 speed control, program operation, 4 segment reduction switching, UP/DOWN functions, counter, external emergency stop function. There are 5 multi-function output terminals for displaying running, zero speed, counter, external abnormity, program operation and other information and warnings.
【Multi-Protection Functions】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection, restarted by frequency track after instantaneous stop, anti-stall during acceleration/deceleration operation, electronic circuit protection. And many other protection functions, such as over-heat protection, restriction of reverse running, direct start after power on, fault reset, parameter lock PID, one-drive-more, ect.
【Installation/use environment】In order to make the cooling effect, the frequency converter must be installed vertically and ensure that the air is flowing smoothly. Before installing and using the product, please read the instruction manual (included in the package) of the inverter carefully to give full play to its functions and ensure safety.
RATTMMOTOR 100mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for CNC Router Engraving Milling Spindle Motor
KWD 11.500
LoveDeal 7-70V PWM DC Brushed Motor Speed Controller, Switch Control with 30 Amp Fuse, Adjustable PWM Motor Speed Regulator 12V 24V 36V 48V, Used for Fan Speed Control, Power Wheels, Electric Motor
KWD 5.500
Wendry DIY CNC Controller Card, USB 4-Axis Linkage Mach3 Stepper Motor Motion Control Card, 100Khz Motion Controller Card Breakout Board for CNC Engraving
KWD 8.500
Supplying Demand W51-14CJA1-02 HVAC Condenser Motor 1/4 HP 1 Phase 1 Speed 208/230V 1075 RPM Must Match Specs of Current Motor to Function Correctly
KWD 52
