Pre-cleaning
Remove dust, dirt, polishing oils, residual water and other residues from the surface. Polish the surface to remove defects (scratches, swirl marks or oxidation). Graphene Matrix is a semi-permanent coating. Scratches should be repaired before application, otherwise they will remain sealed under the coating.

Application instructions
For best results, we recommend applying the ceramic sealer at temperatures between 15-25°C.

Application
Shake the bottle well. Apply a few drops of CGX to the applicator sponge and apply in straight, slightly overlapping lines to the ceramic, lacquer, plastic or glass surface. If the sponge begins to drag or the application becomes uneven, add additional drops to the sponge. About 1-3 minutes after application, the rainbow effect turns into a film. This means the nano care coating can be removed. To do this, use a good quality microfiber cloth and wipe the area in small, circular motions without pressure. IMPORTANT: Check that the excess coating has really been removed and not just pushed into adjacent areas! If you apply a second coat, there must be at least one hour between coats.