Suitable for most brass-wind instrument, including: trumpet, trombone, horn, Euphonium.Easily remove any stuck mouthpiece.Portable size, convenient for carrying and storage.
[Instructions]: 1. Adjust the upper support plate and the lower support plate to the proper position (keep parallel).
[Instructions]: 2 .The cup holder of the upper support plate is stuck on the edge of the mouthpiece cup, and the two cards are stuck at the edge of the mouthpiece hoop (the mouthpiece should be in the middle of the lower support plate after the card number) and tighten the cards.
[Instructions]: 3. The two support screws are evenly applied (turn clockwise), and the upper and lower support plates must be kept parallel.
[Instructions]: 4. The rotation of the screws on both sides should not be too large, preferably in units of 3/1 turn, and the two support screws should be applied separately.
[Notice]: 1. If the mouthpiece is too tight and cannot be twisted, you can put a piece of cloth to use force
[Notice]: 2. If it can't be screwed again, it can be easily pulled out with the help of pliers or wrench.
[Notice]: 3. Remember to make a maximum of 3/1 turn, and apply force to the screws on both sides respectively.
[Notice]: 4. In order to prevent scratches, it can be wrapped with cloth
-16%
Sky Rain-Proof Trumpet Case Lightweight Gig Bag Box Backpack Adjustable Straps
KWD 21
Yamaha 48L Large Shank Trombone Mouthpiece (YAC SLL48)
KWD 25
Cecilio Portable Trumpet Stand Holder, 3 Leg Foldable, Detachable, Compact In-Bell Trumpet Holder with Self-storage Peg Compartment and Protective Felt Pads
KWD 7.500
Trumpet Mute Cork Strips Aluminum Alloy Practice Cup Trumpet Cornet Straight Mute Silencer Practicing Musical Instrument Accessories
KWD 4
