Purpose: This board is an ideal choice to replace ordinary high-current diodes and solar panels in parallel, and is suitable for charging reverse irrigation protection.
How to Use: 1. Unscrew the screws before wiring; 2. According to the signs on the board, positive input and positive output; 3. Wrap the wire in the middle of the screw gasket and tighten the screw; 4. Or use clips to directly clamp the copper sheet.
Advantages: Providing a lower loss way, in high‑power applications, offers a high‑efficiency solution, reduce the need for heat dissipation, saving circuit board space.Adopt an N‑channel MOSFET to replace a diode to reduce power consumption. Use ultra‑strong high current low MOS tube, 300A, 1.5 milliohms.
Features: The input and output are equivalent to diodes. When the output voltage is detected to be greater than the input, the output will be turned off. The detection value is in the millivolt level, and the response speed is fast.
Guarantee: If you are not completely satisfied with the purchase or the product,please do not hesitate to contact us in time, and we will solve the problem for you as soon as possible.
Description
Specification:
Item Type: Diode
Material: Brass
Working Voltage: 9-70V
Maximum working current:50A
Copper Foil Thickness: 1.5oz
Circuit Board Size: Approx. 38 x 54mm/1.5 x 2.1in
Purpose: Replace ordinary high-current diodes, ideal for parallel connection of solar panels, suitable for charging anti-backflow protection
12V/24V Digital Window Voltage Comparator/Voltage Measurement(24V)
KWD 4
Major Brands 74LS374 Octal D-Type Flip-Flop Register, 8-Bit, 3-State Output, DIP-20, 5V (Pack of 10)
KWD 4.500
AD8302 RF/IF Phase Detector Module LF-2.7G Phase Detection Impedance Analysis Module
KWD 4
Bridgold 5pcs IRFP260NPBF IRFP260N IRFP260 N Channel MOSFET Transistor, 50 A, 200 V,3-PIN
KWD 4.500
