Description:
The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer, with volume control>
It is very large and can collect a wider range of sound in case you are not sure where are the best parts of the sounds.>
This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done! >
Fit for most string music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc.>
>
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response
3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.

Specification:
Material: metal
Cable long: approx 42cm
Plug Dia: approx 6.35mm

Package included:
1 * Disc piezo pickup