An Alternative Product for Bottom Mount Tonearms In addition to the range of acclaimed 2M top-mount models Ortofon is proud to present the new 2M Verso configuration for bottom mounting. Every 2M model is now also available in Verso configuration to allow easy mounting on tonearms which do not allow the screws to pass through the top of the headshell. Features Advancements in Sound The 2M Series features Ortofons trademark split pole pins an invention which enables moving magnet cartridges to have a flat frequency response as with a moving coil cartridge. Split pole pins were invented by Ortofon and were originally presented in the 500 and Ortofon OM Series. Ease of Use The weight and size of 2M Series have been optimized to fit the most common turntables on the market today. The cartridge body has also been streamlined to provide easy mounting and alignment. The name 2M was chosen as it represents the abbreviation for moving magnet MM. Moving magnet cartridges provide excellent compatibility in an assortment of playback systems and with a wide variety of phono preamps. Stylus Types All of the 2M cartridges feature diamonds that are polished to the highest standards of the industry. What's in the Box: 2M Blue Verso Moving Magnet Cartridge Stylus brush Allen key Torx 6 Allen key Torx 8 Screws Specifications Output voltage at 1kHz 5cm/sec.: 5.5mV Channel balance at 1kHz: 1.5dB Channel separation at 1kHz: 25dB Channel separation at 15kHz: 15dB Frequency range at -3dB: 20 - 25000Hz Frequency response: 20 - 20000Hz +2/-1dB Tracking ability at 315Hz at recommended tracking force: 80m Compliance dynamic lateral: 20m/mN Stylus type: Nude Elliptical Stylus tip radius: R 18m Tracking force range: 1.8g (18mN) Tracking force recommended: 1.5g (15mN) Tracking angle: 20 Internal impedance DC resistance: 1.3kOhm Internal inductance: 700mH Recommended load resistance: 47k Ohm Recommended load capacitance: 150 -