The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits . The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.

Extrusion temperature: 230°- 260°C
Heated Bed Temperature: 80°C
Print Speed: 50mm/s or less
Diameter: 1.75mm +/- 0.03mm
Net Weight: 200 grams
Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool.