What frequencies supported:It covers 0mhz to 6GHz so it pass whatever frequency you want to receive while protecting your indoor equipment.such as:AM/FM,HD,UHF,VHF,29mhz ,118mhz ,433mhz ,470mhz 650mhz ,700mhz ,850mhz ,915mhz ,868mhz 1700mhz ,1900mhz ,2100mhz ,2.4g 5.8g ,etc .
Cause lower dBi loss:The loss is less than 0.1 dBi (magnificent),The arrestor has a VSWR ≤ 1.25 so as long as the other components in the system are higher, this arrestor will not impact the VSWR.
How much lightning can handle:Lightning arresters are specified as the maximum amount of current they can handle over a specified time since it the amperage that causes the damge more than the voltage. This model is rated at 10 kA (8/20 μs).it has been superior to other types of lightning arresters.
It can be used outside/inside . the arrester are weatherproof by design, and as long as you tighten it properly it should be fine. You may still want to weatherproof the entire connection. you can use 3M 130C tape to seals to itself.
It needs additional grounding cable, 8 or 6 gauge copper wire preferably.
Easy to Install :the lighting arrest with N-Male on the end (for antenna). The type of connector at the other end is N female (for external cable ).the ground terminal connection is for grounding cable.
Package: 1 piece lightning arrestor.
Description
Specifications:
Frequency: 0 - 6 GHz
Discharge Voltage: DC 90V
Impedance: 50 ohm
Insertion Loss: VSWR : Connectors: N-male to N-Female
O-Ring: Rubber
Operating Temperature:-55℃ to +155℃