Specification:
Condition: 100% Brand New
Material: Plastic
Color: Shown as picture
Size: 117 * 70 * 30mm / 4.6 * 2.8 * 1.2in
Frequency: 125KHz
Button: Read Button, Write Button
Power supply: 2 piece AAA battery, it can be replicated 20 thousand times.
Distance: The key reading distance can reach 2.5cm, and the card can reach 6cm. Cards: T5577\EM4305\CET5200 and all T5577, EM4305 compatible cards.
Package Weight: Approx. 89g / 3.1oz

Package Included:
1 * RFID Copier (Batteries are not included)
1 * Keyfob

Usage method:
Start the replicator.
1. Push the switch on the right side of the replicator up, the red light is always on, the green light and yellow light flashes, the buzzer sounds, indicating that the start-up is successful, otherwise it can be restarted once.
2. When the replicator starts, at this time do not read any card, and then press the replicator right-click to write the card, you can write the card into a full zero ID card, write successfully, buzzer beep 2.
Copy ID card.
1. Push the switch on the right side of the duplicator up, the duplicator beeps, the green light and the yellow light flashes to indicate that the start-up is successful.
2. Put the old card on the left side of the replicator, press the left key of the replicator to read the card, and the reader beeps 2 times to indicate that the card is read successfully and the green light is on at the same time.
3. Change a new card, press the right button of the replicator to write the card, and the reader ticks 2 times to indicate that the card is successful and the yellow light is on, so that a clone card is made.