About us:
The display part of this module adopts the voltmeter microprocessor, and by using the on-resistance of power MOSFET
and eliminating the current detection resistance, the efficiency is maximized, up to 96.4%.High power low resistance MOS tube,
large package, high current, high efficiency schottky, super wide and thick PCB wiring.Ultra-wide voltage operation, 128W output
power can be reached when input and output voltages are above 20V. Long-life switch power supply dedicated high frequency high capacity low resistance
aluminum electrolytic capacitor, so that the output ripple is lower, stable performance.

Package including:
2pcs x DC module

Module performance and features:
1. Input voltage: 3 ~ 35V dc (note: input voltage is less than 4V, the onboard voltmeter fails)

2. Input current: 9A (Max)

3. Output voltage: 3.5 ~ 35V dc (this board is a lifting platen, and the output voltage shall be >= the input voltage)

4. Output current: 6A (Max)

5. Output power: 75W, (128W when input and output voltages are greater than 20V) 6. Conversion efficiency: 96.7% (highest)

7. Output ripple: 24mV(TYP)

8. Range of onboard voltmeter: 4~40V, error + -0.1v

9, short circuit protection: yes (limit current 14A).Tips: when accessing the high-power load, since the impact current of the start-up is very high, it is recommended to start the machine first and then access the load.

10. Input reverse connection protection: none (if necessary, please input large current diode in series).

11. Length x width x height =47*43*12MM (excluding copper column) 12. Weight: 15g

Tips: when accessing the high-power load, since the impact current of the start-up is very high, it is recommended to start the machine first and then access the load