eSenlite Radar Motion Sensor Activated Retrofit Light Sockets
Simply install in an existing light socket and then screw bulb into the fixture. Make your life a litter easier.

Specifications:
Operating power: 90-230VAC/50/60Hz
Operating power load: 60W(max)
Built on LED light load: 1W/80LM
Radar HRF: 5.8GHz, ISM band
Detecting angle: 360D wide coverage(adjustable)
Delay timing: 5sec/1min/3min/8min
Installation Size: Diameter-2.5"(Max); Height-2.25"(Installed)
Mounting method: Ceiling, Wall and Stand; Vertical or Horizontal
Operating temp: 5F to 158F(-5 to +70C)
Operating method: Smart (default) or Auto

Feature and Function:
- Built-in Doppler/Microwave SMART sensor: penetrate physical barriers, overcome temperature changes, no motion sensing delay
- Innovative lighting no motion sensing delay modes with extremely low-low power consumption: SMART-moonlight mode(fixed 1W/80 Lumen)or traditional Auto-on mode(Make your own choice!)
- Featured with photocell sensors for true Dusk to Dawn illumination all night long
- Easy DIY: keep your existing stylish light fixture with added-on user-friendly lighting profiles and SMART saving feature.

This is 1-Unit Pack.*NOTE: Please check the size and make sure you have enough space in your lamp or installation area to use the light bulb with the sockets. *Radar sensor can detect motion through glass and wall so adjust the detection range based on actual performance. Contact us if you have any question before or during the installation.