It can be used for removal of inboard facing pins or bolts to be removed from the outboard side of the brake caliper or vehicle component
To remove the circlip pin, you need to use a tool to manually tilt it out 8 mm, and then you can use an air hammer to collide with the detacher
To remove caliper pin ,simply back the pin bolt out half way and place the tool over the bolt shank to strike against the bolt head
,For disassembly of the pin with internal thread, the bolt needs to be screwed in to leave a gap of 8 mm, and then an air hammer can be used to collide with the disassembler
Air hammer version,Fits all sizes of pins or bolt shanks ranging from 1/8 inch (3 millimeters) to 3/4 inch (19 millimeters),Remove frozen caliper pins by allowing a striking force to be applied to the pin
Description
BZBMGMO Upgrade Brake Caliper Pin&Bolt Remover Fit for Air Hammer,Larger Size Adjustment Range,Wider Tool Collocation
