About Carbon Brushes:
It is a common motor component replacement item fix for motor malfunctions.
Used for carbon brush replacement on various power tools and motors,
such as hammer drills, circular saws, cut-off saws and angle grinders.
Material:
Made of graphite and copper, quenched at high temperature, with high hardness and wear resistance.
Package Included:
40Pcs 10 sizes carbon brushes
5*8*12mm-------------------4Pcs
5*8*13mm-------------------4Pcs
6*10*16mm----------------4Pcs
7*18*16mm--------------4Pcs
6x10x17mm-------------------4Pcs
5x11x18mm---------------------4Pcs
5x11x16mm--------------------4Pcs
6x8x14mm---------------------4Pcs
3x10x13mm---------------------4Pcs
6x9x13.5mm---------------------4Pcs
Warm tip：
Worn brushes can cause the motor to smoke or spark and should be replaced if it occurs. When replacing carbon brushes,
be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems
that may not be solved by replacing the carbon brushes.After replacing new carbon brushes, if it doesn't take
a few minutes or hours for the carbon brushes to wear out or wear in half, it means your rotor is bad. Please replace the rotor promptly.
WORRY-FREE：
If you are not satisfied with our products for any reason, please feel free to contact us and we will solve the problem. Hassle-free lifetime service.