Search

Search

Bambulab P1P P1S Upgrade Light Y-Splitter Set Works with Original Plug and Play: 5V 12W Three Segment Light-Bar with 1 to 2 Adapter, 3D Printer Accessories BCZAMD

KWD 7.500
– 1 +

Special Features

  • This time we bring a new upgraded model, the difference with the previous version is that we have this one is with a 1 to 2 adapter, which can be realized at the same time as the original light bar, and realistically improve the brightness of the room of your printer! 1 to 2 design, no need to modify your machine's software, plug and play. Gives your printer chamber a different brightness for videotaping or photographing while you print. Plus, it won't interfere with the machine's original demo camera .
  • Another upgrade point is that we added wiring tape this time, no need to worry about messy wires, you can wire it according to our pictures or videos, or according to your own ideas, we are eager to progress together with 3D printing enthusiasts. Easy Installation: No expertise is required. There is a double-sided tape on the back of the light strip. It is ready to use without fixing. Effortlessly install and pair with your Bambu Lab P1P / P1 3D printer. Not compatible with X1/ A1 series printers, their terminal connectors are not the same, if yours is a X1 series printer, please purchase ASIN：B0CYLV3YRY
  • After our engineer's test, if you use our strip + machine original light to connect AP board at the same time, it will indeed exceed the maximum limiting current, which may lead to AP board burning.
  • Therefore, we offer the following program: 1. Cut off two of the three sections of the strip, keep one section and insert it into the AP board at the same time with the original lamp, but at this time you need to re-solder the wires of the strip by yourself. Due to the trouble caused by our mistake, we decided to produce a section of the light strip with a very long extension wire and send it to Amazon warehouse as fast as possible and then ship it to you for free. 2. For the time being, only use 3 sections of light tape and wait for us to send you a replacement light tape with extension wire
  • For future products, we will send them as below: 3 sections of light strip + 1 section of light strip with extension cord + Y-splitter for customer's free choice of installation. (Currently we still have more than 30 sets of one section light strip without separate extension cord in Amazon warehouse, if you purchased it, please contact us and we will send you a replacement as fast as possible) Please understand that we ignored the current limit because we had no problems in the test.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}