【 Upgrade Thermistor NTC 100K 3950 Temperature Sensor 】Metal head diameter: 3mm, head length: 15mm, wire length: 47.3inch/1.2 meter, connector: XH2.54 2PIN（Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）
【 Widly Compatibility 】 Product recommended operating temperature -50°C ~ +280°C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 Ender-3 CR10 plated copper high temperature heating block,also fit voron hotend dragonfly-BMO/BMS-hotend Spider-hotend etc
【 High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off and ensure the maximum service life with precision temperature measurement
【Temperature Cartridge Thermistor 】Recommended marlin setting *13:100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"#define TEMP_SENSOR_0 13.These sensors wires are flexible.Heat shielded probe leads to the copper sensor,unlike the other ones you see with a nickel plated probe/heat shrink, this can be fitted in very tight spots without worry.
【 Please Notice 】 After the product has been opened and left in the air for a long time, the copper metal part may change color, which is normal.
Compatible with ANYCUBIC Vyper Hotend, Upgrade Vyper V5 J-Head Hotend 24V 40W and 2X Volcano Nozzle 0.4mm, 1X Volcano Silicone Sock Compatible for ANYCUBIC Vyper 3D Printer
KWD 7
CHC V6 Hotend Ceramic All-Metal: Compatible with e3d V6 hot end Full kit Voron 0.1 Voron 2.4 Prusa i3 Mini MK2 MK2S MK3/MK3S/MK3S+ (24V 60W)
KWD 32
i3 Mega All-Metal Hotend Upgrade: Plated Copper Block Compatible with Anycubic i3 Mega/MegaS/MegaX/MegaPro V5 J-Head Hot end
KWD 11
V6 Hotend All Metal 24V - Compatible with Voron 0.1/2.4 Prusa i3 Mini/MK2/MK2S/MK3/MK3S/MK3S+/e3d V6 hot end Full kit
KWD 32
