Fits the following vehicles:
2014-2021 For Jeep Cherokee
2014-2018 For Ram 1500
2019-2021 For Ram 1500 Classic
2014-2018 For Ram 2500
2014-2018 For Ram 3500
2014-2018 For Ram 4500
2014-2018 For Ram 5500
Color: Black
Frequency: 434MHz
Placement on Vehicle: Left, Right, Front, Rear

Part Number:
68157568AA,68239720AA,68239720AB,68239720AC,68157568AA 68157568AB,68157568AC,68249197AA,68249197AB, 231008-101, 231008-109

Package:
4 x Tire Pressure Sensor

Important Notes:
1.This tire pressure sensor has been programmed in advance, no need to reprogram, just trigger it with tpms scan tool.
2.Please DO NOT attempt to start a sensor replacement job if your scan tool or OBD diagnostic tool cannot detect our sensor to display information such as Real ID,Pressure, Frequency, battery status

The TPMS sensor matching process is:
1. Set the parking brake.
2. Turn the ignition switch to ON/RUN with the engine off.
3. Press and hold the keyless-entry fob transmitter's LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode. The horn sounds twice indicating the TPMS receiver is ready and in learn mode. This can also be performed using the turn signal arm and the driver information center.
4. Starting with the left-front tire, activate the sensor by holding the TPMS tool aimed upward against the tire sidewall close to the wheel rim at the valve stem location. Press and release the activate button and wait for a horn chirp.
5. Once the horn chirp has sounded, the sensor information is learned and a turn signal will illuminate in the next location to be learned. On most models, the driver-side-front will be next. Once the learn mode has been enabled, each of the sensors' unique identification codes can be learned.
6. When a se