5x5 to 5x4.75 Wheel Adapters Specifications
Quantity: Four (4)
Thickness: 1" (25.4mm)
Vehicle Bolt Pattern: 5x4.5 (5x114.3mm)
Wheel Bolt Pattern: 5x4.75 (5x120.7mm)
Hub Bore: 73mm
Thread Pitch:1/2-20
Material: T6 Aerospace Grade Aluminum with 12.9 grade studs
PACKAGE INCLUDES
4 x wheel spacers (1" per unit)
20 x open end 1/2-20 lug nuts
2 x user manual.
Fitment
1987-2006 Wrangler YJ TJ (Unfit jk models)
1984-2013 Cherokee XJ KJ KK
2001-2013 Liberty TY KJ KK
1992-1998 Grand Cherokee ZJ
1986-1992 Comanche
1994-2014 M-ustang
1982-2012 Ranger
1990-2018 Explorer
2007-2014 Edge
1982-2012 Ranger
1991-2011 Crown Victoria
2003-2004 Mach 1
1998-2017 Falcon
Never remove factory installed studs on wheel spacer/adapter.
Never use impact wrench for wheel spacer/adapter installation.
Note: Please make sure that these are the correct application for your vehicle. We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described above.
This spacer adapter includes open-end lug nuts to secure the spacers onto your factory hubs
If your factory thread size is different from 1/2-20 - Need to purchase a set of open-end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to:
1) Shorten the factory studs
2) The wheels need to have open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs