Search

Search

FYSETC 3D Printer Voron0.2 Pro Build Plate Replacement Only, 120mm/4.7inch Double-Sided Build Plate-Textured PEI+PET-CF Sheet, NO Sticker Base, Removable PEI Sheet Bed for VoronV0 V0.1

KWD 6.500
Brand
FYSETC
Weight
69 g
StyleTextured / PET-CF Plate Only
– 1 +

Special Features

  • 【Upgrade Experience】 Excellent double-sided PEI Powder + PET-CF Coating spring steel build plate design. Hotbed Plate Cover Only, 120x120mm/4.7x4.7inch, is a spare part for the Kit (Asin: B0BN372T68) at our store.
  • 【Specail Design】Double-sided Build Plate is One side textured pei powder(Gold) + another coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle positioning easily.
  • 【Wide Compatibility】No glue, No tap, Compatible with various kinds of filaments, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. The adaptation temperature of different materials is different, please adjust it reasonably. Reference bed temperature: PLA(50-65℃), PETG(70-80), TPU(60-70), ABS(90-100, recommend on the Gold side). Note: Please keep nozzle not directly touch to avoid scratch or permization.
  • 【Applicable Model】Size: 120x120mm/4.7x4.7 inch, compatible with new Voron0.2 Pro, Vorn 0/ Vorn V0.1 3d printer if you have the sheet base on your printing platform.
  • 【Good Quality】Made of high quality stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190°C and Carbonfiber side can work with temperature up to 100℃. It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.

Description

What's in the box? 1Piece 120x120mm/4.7x4.7inch, NO sticker bottom. Easy to install and high temperature resistant. If for better adhesion, you can slightly sand it with the sandpapers. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}