Search

Search

1.54 Inch E-Ink Raw Display Module Without PCB for Raspberry Pi/Jetson Nano/Arduino/STM32 SPI Interface E-Paper Screen Panel

KWD 5.500
Brand
xicoolee
Category
Weight
50 g
– 1 +

Special Features

  • This is a 1.54-inch E-Ink Display for the Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W e-paper screen. It has a resolution of 200x200, a black and white dual-color display with an embedded controller, communicates via an SPI interface, and supports partial refresh.
  • No backlight, can display the last content for a long time even in power failure. Ultra low power consumption, basically only need to refresh to use electricity.
  • Preserved solder pads for SPI interface, compatible with other controller boards like Arduino/Nucleo, etc.
  • Ideal for applications such as shelf labeling and industrial instrumentation due to its ultra-low power consumption, wide viewing angle, and clear display without power.
  • Provide development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Description

Features

For Jetson Nano e-paper display, no backlight, keeps displaying last content for a long time even when power down
For Raspberry Pi eink screen, ultra low power consumption, basically power is only required for refreshing
Provide development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 31.8mm × 37.32mm × 1.05mm
Display size: 27.6mm × 27.6mm
Dot pitch: 0.138 × 0.138
Resolution: 200 × 200
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: Viewing angle: >170°

Package content

Note: This is a raw display only, without PCB and driver board.

1. 1.54inch e-Paper x1

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}