Make large raised panel cabinet doors with this fabulous 5 piece router bit set. Use with up to 7/8" Stock. Included in this set: Ogee raised panel bit, 2 bit matched Ogee rail & stile, reversible glue joint bit, drawer lock bit, Allen wrench plus extra spacers, solid wood storage case. Rail & stile bits create a perfectly matched rail & stile door frame. The raised panel bit puts a classic ogee edge on the central panel of your door. Also included is a reversible glue joint bit for gluing up multiple boards to extend panel width. This one bit will rout both joining cuts. Simply set the center of the bit with the center of your stock. Then, run one cut face up and the adjoining cut face down to create a perfect joint. The reversible drawer front bit produces strong, long-lasting joints for gluing the front and sides of a drawer. This bit can also make drawer slides. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Two flute carbide cutters & 1/2" Shanks. Set comes in a solid wood storage case.