Search

Search

AURSINC MMDVM Duplex Hotspot Module Dual Hat V1.5.2 with 0.96 OLED Display Support P25 DMR YSF NXDN DMR Slot 1 + Slot 2 for R Pi 1, 2/2b, 3/3b/3b+, 4/4b, Pi Zero, Zero 2W with USB Port (with OLED)

KWD 26
Brand
AURSINC
Weight
72 g
ColorWith OLED
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • if the board fails to work on duplex mode, please run the upgrade command: sudo pistar-mmdvmhshatflash hs_dual_hat (if this command doesn't work, please try this command: mmdvm.club/index.php/wpsd .html)
  • WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion. HIGH PERFORMACE: 32-bit ARM processor, up to 10mW RF power, fully tested every piece
  • WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero , NOT compatible with Rasberry Pi 4.
  • FREQUENCY: Radio Frequency : Freq:144-148,219-225, (Main Band) 420-475,842-950 NOTE: TX =0, RX=0. Modem select: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO) or any other (GPIO board)
  • The MMDVM Duplex Hotspot board is latest firmware V1.5.2. How to update firmware: (pi-star / expert / ssh access / user :pi-star pass:raspberry) then run sudo pistar-mmdvmhshatflash hs_dual_hat set Jumper BOOT0=1,BOOT1=0 and soler JP1 First! After upgraded finished, disconnect JP1 (After testing, this method can upgrade the firmware)

Description

DESCRIPTION

Original cystal : Original ECS-TXO-3225-147.4-TR from USA
Duplex variant of MMDVM_HS_Hat
This PCB uses the MMDVM_HS .
It has two ADF7021 onboard and allows for duplex operation with two time slots on DMR.

Setting Tips:
Modem select: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO)

Package List:
1x MMDVM duplex HotSPOT Module
2x Antenna

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}