The JET JPM-13CS 13" Closed Stand Planer/Molder boasts a 1.5-HP motor. The sturdy cast iron table and base provide strength and reduce vibration during use. The Three cutter head design produces a superior finish. Built in lockable caster add support and stability to the machine while allowing it to be maneuverable.

Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS planer/molder produces a superior finish with its three-cutter head design and can handle material up to 13 inches wide and up to 6 inches in height. A sturdy cast-iron table and base provide strength and reduce vibration during use, and built-in lockable casters add support and stability while allowing easy maneuverability.

Designed and built with the home woodworking shop in mind (view larger).

Power Base for Home WoodworkingDesigned and built with the home woodworking shop in mind, the Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower, 115-volt motor that can easily be rewired to 230 volts. The motor delivers its power to the cutterhead assembly through a pair of V-belts running in precision-machined multi-groove pulleys. A removable side door on the cabinet provides access to the motor and its belt-tensioning mount should adjustment become necessary in the future.
Superior Cutting and FeedingThe JPM-13CS features an all-steel, precision-machined cutterhead (2-9/16-inch diameter) fitted with three full-width knives. The knives are retained by three-piece wedge-shaped gibs that allow for the installation of many molding-knife profiles without removing the planer blades. The center gib section makes installing most molding knives easy (2 inches wide and under).
The planer/molder has two feed rates, with the high 20 FPM (feet per minute) setting used primarily for dimensioning wood when lots of material is being removed quickly. The 10 FPM speed is used for finish cuts when the smoothest possible surface is desired, and this slower feed rate is also used for molding operations.
Rubber-covered infeed and outfeed rollers keep the stock moving at a consistent pace, and the rubber feed roller surface gets a good grip on the wood without marring the profiled surface of molded wood. Both of the feed rollers are easily adjustable to maintain their performance.
Generously Sized, High-Quality TableThe cast-iron table lends plenty of heft and contact surface, measuring 19-1/4 inches long by 14 inches wide. The table has 6 inches of travel maintained by lead screws on either side and is driven by an easy-to-use hand crank on top of the machine. Handy metric and inch scales flank the infeed housing opening to make adjusting cut depth simple and accurate. It comes with an incorporated dust chute--so it's simple to hook up to a dust collector and keep the shop clean. Four lockable casters (not standard) make it easy to maneuver the tool in a tight shop. It's backed by a five-year limited warranty.

What's in the BoxOne Jet 708524 JPM-13CS planer/molder, and operating and assembly instructions.
SpecificationsMotor: 1-1/2 horsepower, 1 phase, 115/230 volt
Maximum planing width: 13 inches
Maximum planing thickness: 6-1/8 inches
Maximum planing length: 14 inches
Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
Cuts per minute: 13,500
Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
Dimensions: 24 inches by 25 inches by 41 inches
Weight: 258 pounds
Warranty: 5-year, limited

This JET planer/molder features a sturdy cast-iron table, mounted on four precision-ground steel columns for reduced vibration and smooth feeding. It has fully adjustable rubber-coated infeed and outfeed rollers, with a 1-1/2-horsepower motor, which is fully enclosed, fan cooled, and is located at the base of the machine to protect it from wood chips and dust. The two matched V-belts deliver full power to the three-knife cutterhead, while the two-speed gearbox provides smooth molding and fast planing. The high-quality tool steel of the three steel knife sets will provide a superior finish. Adding to the ease of operation, all cutters under 2-inches in width may be installed without removing the planing knives. It has a 13-inch-wide and 6-1/8-inch-thick planing and molding capability.