Power Feed X-Axis for Milling Machine 450 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V,for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on the End
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml;Power Parameter:90Watt,110V input voltage,50/60Hz,single phase;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance.
【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs.
【WIDE APPLICATION】This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end,But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
MUKLEI 12.2 Inches Milling Machine Worktable, Multifunction Mill Working Table, X-Y Axis Milling Machine for Mini Drill and Drill Bracket
KWD 14
-7%
GPOAS AL-460 Power Feed Z-Axis for Milling Machine 450 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V,for Bridgeport and Other Knee Type Mills with a 5/8" Diameter Shaft on the End
KWD 71.500
Genmitsu CNC Router Emergency Stop Switch Push Button for 3018-MX3/3018-PROVer
KWD 4.500
-7%
16mm R8 Shank Milling Machine Arbor for Milling Machine Bridgeport
KWD 13
