- Shopping, made easy.
- /
- Get the app!
Description:
1.The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
2.Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
3.Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
Specification:
Material : Spring Steel
Finish : Chemical Blackening
Material Thickness : 0.65mm
Material Width : 6mm
Spring OD : 38mm
Expand Length (about) : 980mm/38.6inch
Inner Mounting Type : Hook
Outer Mounting Type : Hook
Package Content :
2 x Drill Press Spring
-17%
uxcell Drill Press Return Spring, Quill Spring Feed Return Coil Spring Assembly, 3.2Ft Long, 41 x 6 x 0.7mm
KWD 2.500
uxcell Drill Press Return Spring, Quill Spring Feed Return Coil Spring Assembly, 3.3Ft Long, 43 x 8 x 0.8mm 3PCS
KWD 5
uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 1540mm Expand Long 59 X 10 X 1.2mm
KWD 4
uxcell Drill Press Return Spring, Quill Spring Feed Return Coil Spring Assembly, 5Ft Long, 54 x 8 x 0.8mm
KWD 3.500
