ECCPP 4PCS 2" 4 Lug Hubcentric Wheel spacers 50mm 4x110mm to 4x110mm Wheel Spacers Kits with 10x1.25 Studs 74mm fits for 2002-2007 for Eiger 400 2008-2013 for King Quad 400

🚘【4X110 WHEEL SPACERS 2" SPECIFICATIONS】-4PCS Wheel Spacers 4 LUG 2"(50mm) thick;Vehicle Bolt Pattern:4x110mm;Wheel Bolt Pattern:4x110,74mm Center bore,M10x1.25 thread pitch
🚘【hubcentric WHEEL SPACERS 4X110 Compatibility】Fit For 2007-2014 for Grizzly 450 2009-2014 for Grizzly 550 2002-2008 for Grizzly 660 2007-2014 for Grizzly 70 2002 2003 2004 2005 2006 2007 for Eiger 400
🚘【4X110mm WHEEL SPACERS hubcentric】Please confirm about the Fender Gap,this decides the thickness range should be fitted. For a car without leveling lifting,to avoid rubbing
🚘【2" WHEEL SPACERS 4 lug】The body of wheel adapters is made of Forged aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength.And Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and nstantly,greatly improve the vehicle stability
🚘【50mm WHEEL SPACERS HUB CENTRIC Essential VERIFY FITMENT】 Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 10x1.25mm threads; 2) You have more than 2 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 2 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 74mm,advise torque specs at 63-80 N/M

Hello,