Lamp model: for Viewsonic RLC-092 / RLC-093
Wattage: 190W
Lamp Lamp Life:3000-4000 Hours
Warranty time: 180 Days
TYPE: 1*new replacement projector Lamp bulb with housing

COMPATIBLE MODULES(Ctrl+F to find your model) : For Viewsonic PJD5151 PJD5153 PJD5154 PJD5155 PJD5250 PJD5253 PJD5254 PJD5255 PJD5353LS PJD5553LWS PJD5555-Tiger PJD5555W PJD6252L PJD6350 PJD6351Ls PJD6550LW PJD6551Lws PJD6551W RLC-093 VS14115 VS15871 VS15872 VS15873 VS15874 VS15875 VS15876 VS15877 VS15878 VS15879 VS15880 VS15913 VS16443 Projector;

If you're not sure whether it's compatible with your projector, or if you have any problems when using it, you can send us an email or leave a QA. Our after-sales team will help you.

9 steps to replace the projector lamp
1.Gather the necessary tools, screwdriver.
2.Turn off TV or Projector.
3.Remove Lamp Compartment Door.
4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp!
5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment.
6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out.
7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly.
8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual.
9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.