Search

Search

-6%

FYSETC 3D Printer Platform - Flashforrge Adventure4 Pro Build Plate - Hotbed Cover 10.4X8.7in Removable PEI Print Bed: PET + Textured PEI Double Sides Spring Steel Sheet Top Plate NO Magentic Sticker

KWD 10.500
Brand
FYSETC
Weight
190 g
– 1 +

Special Features

  • 1. A Must Have Upgrade for DIY your FDM 3d printing project: Double sided Build Plate Top Plate Only, one side textured pei powder(Gold) - another PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the bed, especially for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle position.
  • 2. 3D Printer Bed Mat for your stock sticker: !!!※DO NOT Sand/ Nozzle Scratch the PET Surface to Avoid Permanent Damage※. No glue stick and hair- adhesive, Adjusting an Appropriate Z value is important. If too low will cause a filament buildup and easily scratch the print bed. Too high the prints come off the build plate, can't stick onto the hotbed. KEY Factors for a good First Layer: Turn off the fan and Slow down the speed to 100 when going 3d print. A Dry filament also works.
  • 3. High performance: Made of high quality stainless steel, Flexible, high strength and heat resistance, Three-Layer design, thicker and more durable. Powder-coated PEI bed can easily handle temperatures up to 190°C/ 374℉ and Carbonfiber sheet can work up to 100℃/ 212℉. Compatible various filaments, such as PLA, PETG, TPU, ABS(recommend on the Textured bed). The prints removal is like a breeze by slightly bending the plate. Through hundreds of experimental tests, repeated use is still as new.
  • 4. Plate Size: about 266X220mm/ 10.4*8.7inch, fit flashforgee creator 4 pro core xy 3d printer that has the magletic hotbed itself, NOT fit Adventure 3 lite series(Adventure 3 Pro or Pro 2), Adventure 5M/5M Pro, Voxlabe Aquilax2, Before ordering, please measure your print bed, not rely on the print size. for some cloest printer, If you can accept 5-10mm, then get it.
  • 5. Package include: 1pc Pre-Installed flex spring steel plate Only, not come with a magentic base. Dual sided, Removalbe hotbed cover mat.

Description

Feature:
A spare upgrade part for your OEM buildplate: Alternative stock surface, removable and flexible, dual printing surface, fit almost print filament.

For different printing consumables, different printing surface material, you need to adjust well the nozzle and bed temperature, our suggestion testing data:
1. for PLA TPU filament: both sides can stick well, bed temperature 50-65℃/ 122-149℉, Prints come off the surface easily when the temperature of the heated bed reaches 122-149℉.
2. for ABS: recommend print it inside the enclosure to keep warm, only recommend on the gold PEI power coating side, not for another PET-CF side, because this side is made of plastic, the high resistance temperature is only 100℃/ 212℉ on short time.
3. for PETG ASA: bed temperature recommend 70-80℃/ 158-176℉, both sides can stick well.
4. If for better adhesion, you can slightly sand it with the sandpapers.
5. How to clean the build plate: You can use soapy water with soft cotton wool to clean it.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}