RAREELECTRICAL Brand Compatible With DELCO, GM, MAN

ALTERNATOR DELCO 10SI
VOLTAGE: 12 VOLTS
AMPERAGE: 63 AMPS
REGULATOR POSITION: 3: 00
POLARITY: NEGATIVE
ALTERNATOR FAMILY TYPE: 100
OUTPUT STUD DIMENSIONS: 12-24

NEW
WEIGHT: 11.445 LBS. / 5.20 KG

PLEASE VERIFY YOUR OEM PART NUMBER FROM YOUR ORIGINAL UNIT TO HELP ENSURE FITMENT.

BRAND NEW 63 AMP 1-WIRE ALTERNATOR.
THIS IS ONE OF THE FINEST AND MOST EFFICIENT GM ALTERNATORS ON THE MARKET TODAY. THE INSTALLATION IS VERY STRAIGHTFORWARD AND SIMILAR TO THE ORIGINAL UNIT YOU ARE REPLACING. WIRING IS SIMPLE BECAUSE OF THE SELF-EXCITING REGULATOR THAT USES ONLY A 1-WIRE BATTERY HOOKUP OR YOU CAN USE THE 2-PRONG PLUG-IN CONNECTION AND BATTERY CONNECTOR.
SIMPLY DISCONNECT YOUR NEGATIVE BATTERY CONNECTION AND THE WIRES GOING TO YOUR OLD ALTERNATOR. NEXT REMOVE THE OLD ALTERNATOR. INSTALL THE NEW 1-WIRE ALTERNATOR, RECONNECT THE HEAVY BATTERY OUTPUT WIRE GOING TO THE ALTERNATOR OUTPUT CONNECTION, TIGHTEN THE BELT, BE SURE THE OLD UNUSED PLUG-IN CONNECTOR IS TAPED UP AND OUT OF THE WAY. RE-CONNECT YOUR NEGATIVE BATTERY CABLE AND YOUR DONE. ALTERNATOR OUTPUT WILL VARY FROM 14.3 TO 14.9 VOLTS DEPENDING ON BATTERY CONDITION AND ACCESSORY LOAD.
MANUFACTURED WITH 100% NEW COMPONENTS
HIGH TEMP WINDINGS
EXCLUSIVE OE EQUIVALENT RECTIFIER AND REGULATOR
ORIGINAL OE FINISH
EASY 1-WIRE HOOKUP
THIS NEW UNIT IS A DIRECT BOLT-IN REPLACEMENT TO ANY GM ALTERNATOR FROM 1965-1986. WORKS GREAT FOR MUSCLE CARS OR STREET RODS.