10" inch Super-Thin Diamond Lapidary Saw Blade Cutting Disc Arbor Hole 25mm Rim 0.55mm Saving in Material for Jewelry Gems Code 250*0.3*25mm
Product Name: 10 inch lapidary saw blade, gemstone saw
Product Specification:
Outside Diameter : 10" (250mm)
Arbor hole : 0.984"(25 mm)
Can be used on 1/2"(12.7 mm) or 5/8”(16 mm) arbor with a bushing
Thickness: 0.017"(0.43mm) core thickness / 0.022" (0.55mm) on the edge where the diamond is.
Quantity: 1 Piece
Product Description:
Exclusively designed for processing materials for softer high value rocks like turquoise, gaspeite, opals.
These blades are manufactured by crimping Synthetic diamonds directly into the edge of the saw blade. They are best suited for turquoise, opal, glass, and stones in the 4-6 range on the Mohs hardness scale
We don't recommend using this blade to cut too hard materials, such as: jadeite with a Morse hardness of 6-7. Because it is difficult to cut or the blade will be damaged quickly
Advantages: achieving satisfactory cutting results and reducing unnecessary material consumption.
This thin diamond lapidary saw blade offers a very good cost effective option for those that want either very thin kerfs or plan on short term use.
Used for Trimming: They are excellent for trimming small shapes into stones.
This simply means that these blades are meant for small material, not large or slabbing techniques. Also, these blades operate in a single direction so make sure that the arrow on the blade is pointed towards you when mounting.
Use with water as a lubricant.
New, Unused Blade - Not in Original Packaging
These blades were originally packaged in oil so you will see several oil spots on the surface