Autrends 6-30 PSI Tire Air Deflators for Offroad Vehicles, Cars, ATVs, Jeep Wranglers and Four Wheelers - Valve Deflator - 6-30 PSI Tyre Deflator Kit

A tire deflator saves you a lot of time. Using one is as simple as one, two three. You don't have to hunt for that perfectly shaped stick!
It is a unique tool designed to work with tires, so there is minimal chance of damage to the valves.
They are also incredibly compact.

FEATURES
◆No tools required
◆ Easy to adjust to different pressures to suit the terrain
◆Can be used on any standard valve stem
◆easy to transfer between vehicles
◆Adjust tire pressure from 6 to 30psi. in 3psi increments
◆Simply thread onto stems and walk away
◆Manual start/stop valve built in
◆Air immediately releases from tire once screwed on
◆Small & compact, easy to carry

PRODUCT DETAILS
Material: Brass
Tire Pressure Range: 6-30 PSI
L x W: 1.54"x0.47"/ 40x12mm
Weight: 4.6oz/130g
Interface Diameter: 0.31"/8mm

HOW TO INSTALL
Step 1: Lower the tire pressure down to where you want it.
Step 2: With the lock ring and adjusting cap wound down, install the deflators onto the stem. (Make sure the threads are clean and in good condition)
Step 3: Loosen back the adjusting nlknob until you hear air leak, then immediately tighten the cap to the position where the air stops exhausting
Step 4: Tighten lock ring up just a bit until you stop hear air

NOTE: When the tire pressure and the deflator setting is below 8psi, a manual start operation may be required to adjust the deflator.

PACKING INCLUDE
4 x Tyre Deflator
1x Storage Bag

100% Satisfaction.
No reason for return or change.

Order it now!