Instructions:
1. Thoroughly clean the area you plan to work on. Verify that the glass is free of any debris or filth.
2. Distilled water and polishing powder 1 to 1.
3. Submerge your polishing wheel in the water, allowing it to get very moist but not soaking wet.
4. Add enough ceric dioxide and water to the empty tub to create a slurry, or thin paste-like consistency.
5. Attach the dampened polishing wheel to your electric drill and insert it into the slurry.
6. Place the polishing wheel on your work surface; use a small felt wheel to remove any scratches near window corners.
7. keep the wheel moving in a circular and up-and-down manner.

Notice: Take care to prevent the slurry from drying out as this may cause your glass to overheat and shatter.If your slurry begins to dry out, you can sprinkle it with a spray bottle filled with water.
Package include:
25pcs x Sandpaper
1pc X 8 Oz High Grade Cerium Oxide Powder
2pcs x Wool Felt Polishing Wheel
2pcs x 2 inch (50mm) Polishing Disc Backing Pad
4pcs x 2 inch (50mm) Wool Felt Polishing Pad