Body decoration stickers, after installation, give your car a visual enjoyment.
color: Black
Packing: 2Pcs
12cm*220cm in size, please know before buying.
-Satisfactory quality, perfect protection for your car. It will not scratch your car.

Installation Method:
Tools: wipes, sprinklers, scrapers
1. Clean the body, and evenly spray water on the body part to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. Determine where to post. Slowly stick it on one side, scrape it gently with a tool, and peel off the bottom paper.
3. Make appropriate adjustments. After confirming the approximate position of the graph, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.
4. Don't let the car sticker and the body have any separation or protrusion.
5. Try to let the moisture in the car sticker dry out, and if possible, it can be heated and dried appropriately. According to the weather, wash the car again after a day or two.

Precautions:
1.Do not wax one week before deciding to dress up your car. The wax will make the sticker not stick firmly; do not wash the car within three days after the car sticker is applied, and do not put it on rainy days. The effect will be bad.
2.In winter, please heat it before installing.
3.If you really don't want to do it, please go to the local place where you put the sun film to ask for help.

Clear:
Use your nails to gently scrape the edge of the sticker, and then tear it off completely, without leaving marks or damaging the paint. In winter, if it is cold and unable to scrape the corners, use a hair dryer to properly heat the adhesive tape, and the adhesive can be easily removed after it has melted and softened.