Search

Electric Concrete Vibrator, 800W Hand Held Flexible Shaft Concrete Vibrator with 3.9FT Vibrator Rod - Remove Air Bubble, Level & Mix Concrete for Construction

KWD 21

Brand
CNCEST
Category
Concrete Tools
Pattern Name800W - 47Inch Hose
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
1 +

Special Features

  • ✅ Powerful Concrete Vibrator: 800W Concrete Vibrator. Voltage: 110V; Needle Diameter: 35 mm/ 1.38 inches, Lightweight and compact design for all day use.
  • ✅ Shaft length 120 cm/ 47in efficiency concrete vibrator. Long Work Area 3.9ft. long shaft for easy use and long reach, enlarge your work range.
  • ✅ Handheld concrete vibrator with ergonomics design lock-on button for extended use, it can reduce your work pressure.
  • ✅ If vibrator cannot work, please knock the vibrating bar on the ground several times, then it will work. After the vibrating bar knocks the hard stuff, it will have the same frequency with the vibrator to work well.
  • ✅ This cement vibrator is well suited for using to tamp poured ring beam, concrete pedestal, and concrete foundation. It removes air pockets from the concrete, increasing concrete density while saving the amount of concrete.

Description

Hand Held Concrete Vibrator, Is a Kind of Professional Construction Tool Machine, Widely Used in Construction Places. Easy to Operate, the Electric Concrete Vibrator Is Essential to Construction Use, Ensuring the Fastness of Buildings. Vibrate Pouring Concrete to Make It Dense. It Suits for Both Construction Sites and Home.

Specifications
Rated Current: 2.8A
Rated Voltage: 110V
Frequency: 60Hz
Needle Diameter: 35 mm
Shaft Length: 120 cm
Total Weight: 6.3 kg
Package Content
1 × 800W Concrete Vibrator
1 × 1.2m Hose

Feature:
Professional Machine
Stable Voltage 800W, Safe to Operate
Hand Held
Well Constructed with Quality Materials
Powerful and Safe Concrete Vibrator
Flexible Shaft
Hard Nose with Flexible Shaft for Hard to Reach Places
Shaft Simply Screws on to Drive Unit, No Other Tools Required
Lift Time to Use
High Quality and Durable
Easy to Maintenance and Inspection
Widely Used in Construction
Electric Control
Easy to Use Labour Saving Tool to Help Settle Concrete and Remove Air Bubbles from Slabs & Footings

Note
To Assemble the Hose to the Unit: It Is a Reverse Thread.

How to Use
Maintenance and Inspection
Before Any Work on the Machine Itself, Pull the Mains Plug.

The Brushes Should Be Checked Periodically and Warm-out Brushes Should Be Replace in Time,After Replacing,Inspect,Whether the New Brushes Can Move Freely in the Brush Holder,Keep Running the Motor for 15 Minutes to Match the Contact of Brushes and Commentators.

Keep the Ventilation Slots Clear from Dirt , Clean off the Accumulated Dust and Oil Dirt Periodically.

During Normal Operation , If Anything Happens ,the Power Supply Should Be Cut off at Once and the Tool Should Be Checked and Repaired

Regular Inspect All Mounting Screws and Ensure That They Are Properly Tightened, Should Any of the Screws Be Loosen,Tighten Them Immediately, Failure to Do so Could Result in Personal Injury

Do Not Expose the Tool to Rain , Do Not Use Power Tools in Damp or Wet Location ,Keep Work Area Well Lit Do Not Use Power Tools Where There Is Risk to Cause Fire or Explosion.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}