Search

Search

Diamond Core Drill Bit For Concrete 1 3/8 in x 6 in Deep 1 3/8 in Masonry Drill Bit Diamond Hole Saw For Concrete Core Drill Bit Fits Diamond Core Bit Adapter With 5/8-11 UNC Angle Grinder Size Thread

KWD 10.500
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • 1 3/8 In Diamond Core Drill Bit Has 5/8-11 Unc Thread Same Thread As A Small Angle Grinder Thread. This 1 3/8" Diameter Diamond Hole Saw Can Drill Holes 6 Inches Deep / Long This 3/4" Masonry Drill Bit Is Also Available In 15" Deep Version.
  • This 1 3/8 Inch Diamond Drill Bit Is Best Used As A Wet Core Bit For Drilling Concrete And Brick. these Hollow Core Drill Bits Are A Wet Core Drill Bit And Should Be Kept Cool At All Times. Remove 1 3/8 Diamond Bits From Hole Every So Often And Allow Water To Cool Inside The Hole And To Get To The 1 3/8 Core Hole Drill Diamond Cutting Edge.
  • Diamond Core Drills Have A 5/8-11 Unc Thread And The Drill Bit Holder / Core Bit Arbor Is Not The Same As A Regular Hole Saw Arbor Thread So You Do Need A Special Core Drill Bit Adapter In Order To Use This It In An Electric Drill. Core Bit Adapters Are Available In An Extended Core Bit Adaptor Or Standard Length Adapter, The Thread Size Must Be 5/8-11 Unc.
  • Contents 1 Diamond Core Drill Bit 1 3/8 Inch X 6 Inch Long. these Hollow Core Diamond Drill Bits Are Both A Concrete And Brick Drill Bit, It Has No Center Drill So If You Need A Center Drill Make Sure The Core Bit Holder You Purchase Has A Hole To Take A Pilot Drill. Our Adapters Have A Hole Suitable For Tapered Shaft Pilot Drill Bits. Pilot Drills Can be removed once Drilling Started for easier Drilling.
  • 8" Tapered Shaft Pilot Concrete Drill Bit Available Separately Has Tct Tip For Masonry. Smaller Diameter Core Bits Can Be Started At A 45 Degree Angle Then Slowly Brought Level Or Drill A Hole In A Piece Of Plywood And Use It As A Guide.

Description

1 3/8" in Diamond Core Drill Bit X 6" Long 35mm x 152mm 5/8-11 Thread For Core Bit Adaptors Or Angle Grinder Cut Concrete Brick Cement Block Masonry Products fits any of our 5/8-11 UNC Core Bit Arbors. These concrete Drill bits have diamond mixed in with the steel so as these diamond masonry drill bits for concrete wear down fresh diamonds come to the surface so it doesnt go dull until you eventually wear them out. Can be used with 7/16 Hex Diamond Core Bit Arbors or SDS Plus Core Bit Arbors as long as thread size is 5/8-11 UNC - Same as a 5/8" Thread on an Angle Grinder etc. These bits are not dry diamond core drill bits so make sure to use them wet, a running hose directed at the core drilling bits while in use is best. Other Sizes Available 5/8" Diamond Core Drill Bit, 7/8 in Core Drill Bit, 1 inch Core Bit, 2 inch Diamond Core Drill Bit, 3 inch Core Drill Bit, 4 in Core Drill Bit, 5 inch Core Drill, 6 Diamond Core Bit

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}