Search

Search

AceCrew Brass Electric Solenoid Valve Viton 1/2 inch NPT 24VDC Normally Closed - flow control valve for fluid, gas, air

KWD 12.500
Brand
AceCrew
Category
Fittings
– 1 +

Special Features

  • AceCrew Industrial grade Electric Solenoid Valve Normally Closed with Viton FKM/FPM seal
  • Size 1/2 inch NPT thread , Voltage 24V DC
  • Brass inlet & outlet NPT thread , easy to install with 2-way 2-position direct lift diaphragm
  • Normally Closed operation for gas and liquid flow control. Valve will open for flow when energized. Flow rate Cv = 4.5 ; Unidirectional (indication on brass body)
  • Pipe Size : 1/2" NPT Female (14 TPI) . Orifice Diameter : 19/32" (15 mm)
  • Seal: Viton FKM/FPM, fluorocarbon Diaphragm : Viton (fiber-reinforced) Current : 1 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
  • Solenoid actuated Valve with Viton seal is suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, gasoline
  • Viton FKM seal is better resistant to heat , reducing risks of leaks during operation and ensuring a tight sealing when actuated . Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-250 °F (-10~120 °C)
  • Weight of solenoid valve : 1 lb 6 oz Solenoid Valves are backed with our 1 Year Warranty

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}