3 in 1 Design with IPS Screen: This product integrates digital oscilloscope, multimeter, and signal generator into one device. 3.2in clear IPS display screen, high sensitivity full view display, channel 2 waveform can be set to green, cyan, purple.
Signal Generator: Built in waveform signal generator, capable of outputting sine , square , triangular , etc. The voltage amplitude is 2.5V, the frequency is adjustable between 0‑2Mhz, and the square duty cycle is adjustable between 1% and 99%.
High Accuracy Multimeter: Built in true effective value multimeter, supporting software rapid calibration. Able to test DC AC voltage, DC AC current, resistance, capacitance, diode, and on off. When measuring low voltage, resistance, continuity, the oscilloscope and multimeter functions can be used simultaneously.
Digital Oscilloscope: Dual channel oscilloscope, with a bandwidth of 120MHz, and a dual channel mode bandwidth halved to 60Mhz. The sampling rate is 250MSa/s. With perfect triggering function of automatic, single shot, normal. Support sensitivity and time base adjustment, automatic mode adjustment, dual channel waveform analysis, cursor measurement, reference waveform, FFT spectrum, reference waveform, waveform saving and viewing. Equipped with dual channel mode, it can simultaneously measure.
Sensitivity and Time Base: The oscilloscope will automatically detect the signal and adjust the range. Support manual adjustment of waveforms in both vertical and horizontal directions. Vertical sensitivity represents the voltage in the vertical direction, which is adjusted by the mV and V buttons to adapt to different voltages. The time base represents the time in the horizontal direction. Adjustments can be made through the S and NS buttons to adapt to different frequencies. In stop mode.
Frequency Standard Reference Module Crystal Oscillator Constant Temperature Board SMA Female Interface 10MHz
KWD 8
Heating Mantle 500ml/ 1000ml,Magnetic Stirrer Heating Mantle 250W/300W, Thermostatic Electric Heating Jacket Electric Heating Mantle Lab Heating Mantle for Liquid Heating(500mL 250W US Plug)
KWD 26.500
ZKI 20L Digital Lab Water Bath, 110V/1500W, ±0.2℃ Accuracy & 0.1℃ Resolution, Durable Stainless Steel Tank with 14 Integrated Heating Modules, 7-Piece Accessory Kit for Smooth Laboratory Workflow
KWD 306.500
L25-204Y 25Mm Electric Motor, Stainless Steel M6 Nuts and Washers Esp32 Part Centrifugal Switch Accessory 1500Rpm
KWD 3.500
