Arduino IDE compatible microcontroller board, ideal for 3D printers, robots and electronic projects, with 14 digital pins, 8 analog and 6 PWM outputs. It also features 4 UARTs (hardware serial ports), 16 MHz clock speed, USB connection, power plug, ICSP connector, reset button and 32KB flash memory, providing everything you need to support the microcontroller. Specifications comes pre-programmed with a bootloader that allows you to load new code without the need for an external hardware programmer. Input voltage 7 - 12V, Product measurement 101.5 mm width 53.3 mm. SRAM 2 KB EEPROM 1 KB Clock speed 16 MHz. Easy to use Simply plug it into a computer through a USB cable or power it with an AC to DC adapter or battery to get started. You can modify your Uno without worrying too much about doing something wrong. This Uno board is a microcontroller board based on the ATmega328P (data sheet) It has 14 digital input/output pins (6 of which can serve as PWM outputs), 6 analog inputs, 16 MHz ceramic resonator (CSTCE16M0V53-R0), USB connection, power plug, ICSP connector and reset button. It has everything you need to support the microcontroller;Product supplied by MMOBIEL - We always try our best to exceed your expectations every time. Join the ever-growing list of satisfied customers and discover the difference with MMOBIEL.