intelligent brushless sine wave controller for electric bike/electric scooter/brushless motor

if motor not have hall wire，not connect hall wires also can work

voltage：36V/42V/48V/52V/60V/72V/84V universal

current：20A-25A

Phase angle: 60 °/120 ° all can be used

rated power：350W-450W-500W all can work

1.PAS(pedal assist)
2.intelligent recognition（self-learnig line ）
3.low level brake
4.reverse gear
5.cruise
6.speed controller handle（throttle）
7.multiple data meter
8.hall meter
9.hall wires
10.three speed gear
11.phase meter
12.electric door lock
13.anti-theft alarm signal
14.anti-theft alarm power
15.high level brake
16.special for differential motor
17.phase line
18.battery

how to connect ？
1.connect the motor line (color to color）
2. connect the battery line(red wire :battery + , black:battery-) 3. connect the controller throttle line（color to color），connect electric door lock
（if your throttle not have electric door lock，controller electric door lock can be shorted）
4. connect the hall line(if motor without hall line, don't need connect)
5.docking the two self-learning lines, the wheel will forward or reverse.
(1.if wheel forward ,Separate the self-learning line.
2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，
if wheel forward ,Separate the self-learning line.)
6.other functions can be connected as needed.