Universal e-Paper Driver HAT, supports various Waveshare SPI e-Paper raw panels
Overview
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
Features
Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W (directly-pluggable)
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
Operating voltage: 3.3V~5V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 65mm × 30.2mm
Mounting hole size: 3.0mm
Interface
SYMBOL:DESCRIPTION
VCC:3.3V~5V
GND:Ground
DIN:SPI MOSI pin
CLK:SPI SCK pin
CS:SPI chip selection, low active
DC:Data/Command selection (high for data, low for command)
RST:External reset, low active
BUSY:Busy status output, low active
Package Content
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
Note
e-Paper and Raspberry Pi are NOT included.
Original from Waveshare , more resources and technical support is provided , please contact us .