High Performance Motorcycle Lubricant with Technosynthese-Ester for Use in: Street Bikes/Road Bikes/Trails/Off Road Bikes/Enduro/Trial fitted with 4 Stroke engines/integrated gearbox or not/wet or dry clutch/engines meeting Euro 2 or Euro 3 emission regulation/exhaust gas after treatment systems: catalytic converters/air injection into exhaust pipe. // Other Uses: Street Bikes without Catalytic Converters/Scooters/ATVs/UTVs. Technosynthese lubricant reinforced by Ester base stock to warranty anti-wear properties and improve gear protection and life time. // Can be mixed with synthetic or mineral lubricants. Improved oil film resistance at high temperatures for engine durability. // Low Phosphorus and Sulphur content for better operating conditions of catalytic converters required for latest emission regulation. // The innovative anti wear additives package provides excellent gearbox protection. Grade 10W at cold temperature for a better anti wear protection of engine at cranking. // Grade 50 at hot temperature specially designed for big bore engines/thumpers/twins/multicylinders. Color: Green. // Viscosity Grade: SAE J 300/10W-50. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/118.3 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/17.73 mm²/s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-39°C/-38°F. // Flash Point: ASTM D92/218°C/424°F. // TBN: ASTM D2896/8.2 mg KOH/g. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.