Specification:
FCC ID: OHT692427AA/KOBDT04A
Other Part Numbers: 56040649ac,56040649,
05175789AA,05175786AA,05175817AA
Type: 4 Buttons
Frequency: 315 Mhz
Battery Type: CR2032/Button Cell
PACKAGE: 2 x Remote keys(No logo)
Important Note:
✅You need to go to your local dealer or Locksmith shop to cut the key and program to your car,
Locksmith should charge less than the Dealer.
✅Please make sure your key is exactly the same as ours, if you are not sure please send your
original key photo to us for confirmation, we will help you to buy the correct key.
Note: It only Supports Regular Key Vehicles, It Doesn't Supports Push Start Button Vehicles.

Fit for Chrysler:
2007-2009 Aspen
2007-2009 Sebring
2006-2010 PT Cruiser
2011-2014 Chrysler 200
2005-2007 Chrysler 300,300C,300M
Fit for Dodge:
2004-2009 Durango
2006-2008 Ram
2006-2007 Charger
2006-2007 Magnum
2007-2011 Nitro
2007-2013 Caliber
2008-2014 Avenger
Fit for Jeep:
2006-2016 Wrangler
2007-2016 Compass
2007-2018 Patriot
2008-2012 Liberty
2006-2007 Commander
2005-2007 Grand Cherokee

How to Program your Key Fob Replacement:
1. Insert first original working key into the ignition and turn ignition switch to ON. Wait for approximately 3 seconds then
turnignition to OFF and remove key.
2. Within 15 seconds of removing first key insert second original working key into ignition and turn ignition switch to ON.
Wait approximately 10 seconds. You will see the immobilizer warning lamp illuminate on the dash and you will hear an
audible tone.Turn ignition OFF and remove the key.
3. Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON. After approximately 10
seconds you should hear an audible tone and the immobilizer lamp will remain illuminated for 3 seconds. Once this occurs
programming iscompleted.