Specification:

Item Type: Air Sander
Material: Zinc Alloy + Rubber
Weight: Approx. 1157g/40.8oz
Idling Speed: 10000RPM
Working Pressure: 90Psi
Grinding Disc Size: Approx. 12.5 x 12.5cm/5 x 5in
Air Inlet Size: 1/4
Scope of Application: Suitable for home decoration, wall paint treatment, etc.

How to Use:
1. Carry out a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality.
2. The gas pipe must be placed at the back end during operation to prevent accidents.
3. Hold the machine with both hands during work, and ensure a stable foothold.
4. If the gas stops suddenly during work, the switch must be set to the off state immediately.
5. Please apply even force during the grinding and polishing process, and it is strictly forbidden to apply too much force or hit the object.
6. At the end of the work, turn off the switch first, and then put it down after the rotation is completely stopped, and place the grinding disc upward when placing it.

Package List:
1 x Air Sander 1 x Wrench
1 x Air Inlet
1 x Manual

Note:
1. Please allow 02 cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.