Specifications:
Material: Leather
Color: Glossy Beige, Glossy Gray, Glossy Brown, Glossy Coffee, Glossy Black, Glossy Black Red, Hole Beige, Hole Gray, Hole Brown, Hole Coffee, Hole Black, Hole Black Red
Diameter: 14.5-15 Inches
Package Include: 1 x Car Steering Wheel Cover
How to DIY?
1. First put the steering wheel cover on the steering wheel.
2. Punch a hole from the inside of the hood, usually starting under the steering wheel.
3. Tie a knot at the end of the thread, leaving about 2 inches of space.
4. Wrap the needle around the leather stitch and repeat. You don't have to keep punching.
5. You should pull the wire tight each time so that the protective cover is tightly wrapped around the steering wheel.
6. When you reach the point where the steering wheel is connected to the center, wrap the line around the inside of the cover, pull it tight and finish the leather to avoid bumps.
7. Tie a knot at the end and remove excess thread.
If you are realistic about how much time and effort is needed for installation and the kinds of results you can expect, we don't think you will find a better quality wheel cover of this type.
How to maintain microfiber steering wheel cover:
1. Soak a dry towel in water, then wring it out and wipe the steering wheel cover once a week.
2. Wipe the oil on a clean cloth, and then evenly wipe the surface, try not smeating the oil on the leather to avoid damage to the leather.
3. It can not be dry cleaned, only can be washed by water, washing temperature no more than 104 degrees Fahrenheit.
4. Microfiber leather steering wheel cover can not be exposed to the sun, let it dry naturally.