MIFARE Classic 1K RFID Smart Card with a hole (Vertical, 100)

[Chip] - FUDAN FM11RF08 Chip card compatible with MIFARE Classic 1K 13.56MHz wireless frequency,according to the ISO14443A standard,and contains 1K bytes of read/write memory,MIFARE and MIFARE Classic are trademarks of NXP B.V.
[Printable and Compatible] - Printable on all ISO Standard Desktop Photo ID Card Printers(NOT Use for INKJET Printers): Evolis, Zebra, Badgy, Fargo, Magicard, DataCard etc.RFID cards work with KABA,SAFLOK,MIWA AND ONITY LOCKS,also compatible with RC522 and PN532 readers. Can NOT work with HID,Salto and Assa Abloy Locks systems
[Programmable] - All cards are pre-programmed with a unique ID(4 Byte UID). The UID is NOT changeable, factory default key: FF FF FF FF FF FF.
[Reading Distance] - There is Class Chip inside of card via lamination.it's contactless with 1-10 cm reading distance(based on the reader).
[Standard Credit Card Size]- 3 3/8" x 2 1/8" (85mm*54mm) Standard Credit Card Size (CR80 30 Mil),each card individually OPP bag packed. Blank white both sides(no printed numbers, no magnetic strips and no slots or holes)

RFID Smart intelligent Card

Hello,