FEATURES:

Mini airbrush kit for model making, cake decorations, draw the outline of camouflage, nail art, etc.

After repeated trials, the spray gun solves the problem of air backflow and easy screw loosening in the past, giving you

a more excellent experience of use.

Include a USB cable, give you a variety of charging methods.

Exquisite atomization and fine lines with this airbrush.

MAINTENANCE:

Empty the fluid cup and wash with water or solvent by a brush.

Refill cup with water or solvent, then block the needle cover with a finger and spray.

The air flows backward into nozzle to clean the paints remained the airbrush.

Dry the airbrush to avoid stains or rust, convenient for next use

ATTENTION:

1.Do not use solvents that contain harmful substances such as lead solvents which emit harmful substances.

2. Please wash the nozzle with alcohol or water in time after using other liquids. Just pour alcohol or water into the

container and spray water normally. This will clean up the impurities in the nozzle.

3. And please make sure full charge for the first use to prevent unable charge. When not in use, please turn off the

switch in time to prevent damage to the motor.

USEAGE:

1. Add water, alcohol or cleaning fluid to the fluid cup and spray it.

2. Try back flushing. Cover the nozzle with finger or a paper towel and press down slightly on the trigger.

This helps clean the narrow chamber around the needle.

Please Note:

1. Please test the airbrush with water before use to make sure the airbrush is not clogged.

2. When finishing the spraying work or have to stop for more than 10 minutes, please use the cleaning brush to clean

the airbrush cavity, nozzle, and fluid cup thoroughly in time.

3. After 30 minutes of continuous use, the air compressor should be turned off for a few minutes to cool down.

4. Don't soak your airbrush. Even though it might sound like a simple cleaning solution, doing so will actually damage

the more sensitive parts of the tool.

5. Please use water-based makeup foundations instead of oil-based makeup foundations, you need to use makeup

foundations made for airbrushes otherwise it will clog the nozzle.

6. Please do not use the airbrush when charging.

7. If the trigger starts to feel sticky, use one of the special lubricants that are specifically designed for airbrushes.

8. If the airbrush can't spray liquid, it may be because the fluid control knob is too tight or the nozzle is blocked.

Please try to adjust thee fluid control knob or clean the nozzle with alcohol or detergent.