Replacement Part Number:
Replace 1580584 25770670 68018105AA 68048901AA JA1722
Compatible Models:
Before purchasing, please check carefully according to your car model and year before purchasing::
Fit for Chrysler 200 2011 2012 2013 2014
Fit for Chrysler Sebring 2007 2008 2009 2010
Fit for Dodge Avenger 2008 2009 2010 2011 2012 2013 2014
Fit for Dodge Caliber 2011 2012
Fit for Dodge Journey 2009 2010 2011 2012 2013
Fit for Jeep Compass 2010 2011 2012 2013 2014 2015 2016
Fit for Jeep Patriot 2010 2011 2012 2013 2014 2015 2016 2017
Fit for Jeep Wrangler 2011 2012 2013 2014 2015 2016 2017
Fit for Ram 1500 2013 2014 2015 2016 2017 2018
Fit for Ram 2500 2013 2014 2015 2016 2017 2018
Fit for Ram 3500 2013 2014 2015 2016 2017 2018
Fit for Ram 4000 2013 2014 2015 2016 2017 2018
Fit for Ram 4500 2013 2014 2015 2016 2017 2018
Fit for Ram 5500 2013 2014 2015 2016 2017 2018
Fit for Ram 700 2018
Fit for Ram Promaster 1500 2014 2015 2016 2017 2018 2019
Fit for Ram Promaster 2500 2014 2015 2016 2017 2018 2019
Fit for Ram Promaster 3500 2014 2015 2016 2017 2018 2019
Fit for Ram Promaster Rapid 2017 2018
Installation Steps::
If you have some relevant mechanical knowledge, you can replace it according to the following steps:
1. Be ready to replace the blower resistor, tools, turn off all electrical equipment and ignition switch of the car
2. Disconnect the car's battery and the blower assembly connector, remove the blower fixed wiring harness, and then remove the blower assembly fixing screws
3. You can find the resistor where the blower was removed, use a tool to remove it, and replace it with a new resistor
4. Reinstall the blower and various circuits, energize the battery, and start the car to start the blower
5. Check whether the blower can adjust the wind speed