FYSETC 3D Printing Platform - Textured PEI Flexible 260x260mm/10.2x10.2in Double Sided Spring Steel + Magneticsticker Replace Original Build Plate Geetech A20 A20M A20T Mizar S Tronx xy-2 pro

A upgraded textured heat bed cover coated with PEI powder, comes with a Magletic bottom sheet back with adhesive. The sheet can be printed on two sides. A supplyment of PEI Magletic Flexible Heated Bed (Asin: B085WTW4LT) at our store.
removable build surface plate: 260x260mm/10.2x10.2inch, compatible with Geetech A20/A20M/A20T/ Mizarr S and Tronx xy-2 pro or other similar size heat bed.!!!Please measure your build plate before ordering,not rely on bulid volume. If can accept the deviation 0.5-5mm, 255mm X 255mm 3d construction plate, just buy it.
Build plate textured pei, just simply stick the magletic bottom sheet onto your build plate, then align the steel platform onto it and level the heated bed. Please adjust the distance between the nozzle and pei surface. The maximum temperature for printing is about 120℃ on the bed.
Easy to remove the prints from the flexible sheet when the temperature of the heated bed reaches room temperature. If the print is still stuck, gently flex the plate and pop off the model!
The compatibility of filament range is wide, such as PLA, ABS, PETG, TPU, PUA, etc. You can directly print on the steel sheet without using any glue or other tools to help the model to stick. After printing, let the bed cool down, then clean the plate with alcohol or 4000 grit micro mesh, it looks new and has great adhesion. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.

Package includes:1X 260mm/10.2in flex plate + 1X Magletic sticker B side

Hello,