Programming:
1. Close all doors then open drivers door press unlock button on drivers door while door is open . Insert key into ignition. Keep foot off brake pedal.
2. Turn ignition from Off to Run 8 times ending in Run ( Do not start the car, run position is just before the vehicle will start Off is turned
all the way back when the key can be removed from the ignition ). Must be performed within 10 seconds. Locks will cycle signaling
entering into programming mode.
3. Press any button on the remote being programmed, locks cycle confirming programming. Repeat this step for any addition remotes.
4. Turn key to off, locks will cycle to end programming mode.
This remote will work as a replacement for the following part
numbers: CWTWB1U345, CWTWB1U331, GQ43VT11T, CWTWB1U212, 8L3T-15K601-AB, 2L3T-15K601-AB, F87B-15K601-AB,
8L3Z-15K601-AA, 164-R8007, OUCD6000022, 164-R8070.

Compatibility:
please be sure to check the vehicle fitment guide.
Your vehicle must already be equipped with keyless entry for the remote to work.

Ford:
2008-2014 E-150, E-250, E-350
2007-2015 Edge
2005-2014 Escape
2003-2016 Expedition
2000-2015 Explorer
2001-2010 Explorer Sport Trac
1998-2016 F-150, F-250, F-350 Super Duty
2009-2016 Flex
2006-2012 Focus
2004-2007 Freestar
2005-2007 Freestyle
2006-2012 Fusion
2001-2012 Ranger
2008-2009 Taurus

Lincoln:
2006-2008 Mark LT
2007-2013 MKX
2007-2016 MKZ
2003-2008 Navigator

Mazda:
2001-2008 B2300, B2500, B3000, B4000
2008-2011 Tribute

Mercury:
2003-2004 Marauder
2005-2011 Mariner
2004-2007 Monterey
2000-2010 Mountaineer
2000-2009 Sable
Packing concent：
2 X uncut ignition keys
2 X keyless entry remotes.