Search

Search

Auniwaig 7 Inch Hook and Loop Polishing Backing Pad for Sanding Discs Sanding Buffing Backer Sticky Plate with M14 Drill Adapter Attachment for Power Polishers & Buffers 2pcs

KWD 8
Brand
Auniwaig
Weight
341 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • 【DIMENSION】-7 inch hook and loop backing pad, with M14 drill adapter
  • 【METERIAL】-The PP material is durable and not easy to crack,the high toughness cushion and the special-shaped processing surface fit more comprehensivelyachieve consistent and smooth finish work
  • 【WIDE APPLICATION】-This Hook and Loop Buffing Pad is widely used for large area polishing of furniture,floors,cars, etc.,to polish irregular surfaces,etc.,safe and good polishing effect, making your work more efficient
  • 【FEATURES】-Wide range of uses; easy to use; simple to operate;hook and Loop backing can be replaced quickly and easily, has strong bonding ability
  • 【NOTE】-The adapter rod is a left-handed thread, and the direction of rotation should be clockwise. If you rotate it counterclockwise, the backing pad may loosen. It is recommended to idling for more than one minute before use, and observe whether the machine is operating normally.

Description

Auniwaig Sanding Polishing Backer Plate with Drill Adapter

Package Content:
2pcs x Sanding Polishing Backer Plate with Drill Adapter

Description:
1.Widely used for large area polishing of furniture, floors, cars, etc., to polish irregular surfaces, etc., safe and good polishing effect, making your work more efficient
2.The backing pad is used with sanding papers or polishing pads, for use on angle grinders, bench grinders, electric drills and other pneumatic and electric tools
3.The PP material is durable and not easy to crack,the high toughness cushion and the special-shaped processing surface fit more comprehensivelyachieve consistent and smooth finish work

Specification:
Abrasive material: Sponge
Drill bit:7 inch(180mm)
Thread: 14mm/0.55 inch
Bar diameter:8mm/0.31 inch
Note:
1.The adapter rod is a left-handed thread, and the direction of rotation should be clockwise. If you rotate it counterclockwise, the backing pad may loosen. It is recommended to idling for more than one minute before use, and observe whether the machine is operating normally
2.Safety concerned, it's necessary to wear goggles or eyes protection tools in case the cleaning agents fly out while turning

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}